1. 090-003-01 – Anchor Yoke

2. K71-630-00 – Caliper Assembly for LH or RH Contains:

4 006-045-00 – Caliper Mounting Nut

4 007-254-00 – Caliper Mounting Bolt

1 019-019-00 – Cotter Ring

1 027-060-00 – Tube Clamp

1 046-145-00 – Anti-Rattle Spring

1 054-092-00 – Bleeder Screw

1 054-094-00 – Adapter Fitting

1 056-038-00 – Pad retaining Pin

1 071-513-00 – Cross Over Hydraulic Line (yokes without notch)

1 071-518-00 – Cross Over Hydraulic Line (yokes with notch)

1 087-002-00 – Hex Bolt

2 089-003-02 – Assembled Caliper Half

3. K71-629-00 – Brake Pad Kit (axle set)

4. K71-631-00 – Rotor Kit

5. 005-058-00 – 1/2″ Lock Washer

6. 006-129-01 – 1/2″ Hex Nut

7. 007-097-00 – 1/2″ Brake Mounting Bolt

8. 097-002-00 – ABS Sensor Retaining Clip

9. 097-004-00 – ABS Sensor (straight)

Disc Brake Hubs & Studs

10. 008-399-05 – Grease 9/16″ Studs 8 on 6.50″

*008-399-90 – Complete with Bearings & Seals

10. 008-399-06 – Oil 9/16″ Studs 8 on 6.50″

*008-399-91 – Complete with Bearings & Seals

10. 008-399-07 – Grease 5/8″ Studs 8 on 6.50″

*008-399-92 – Complete with Bearings & Seals

10. 008-399-08 – Oil 5/8″ Studs 8 on 6.50″

*008-399-93 – Complete with Bearings & Seals

11. 007-257-00 – 9/16″ 18×2.50″ Press-in Stud

11. 007-115-00 – 5/8″ 18×2.50″ Press-in Stud

Retrofit Kit

(K71-635-00) For Dexter 8,000 lb. axles. For one brake. Unhanded.
Required idler hubs are not included with this kit.

Can only be used with 16″, 16.5”, and 17.5″ wheels on an 8 on 6.50″ bolt circle. Axle overhang requirement: Leaf spring straight axle = 8.25″ per side. Leaf spring drop axle = 9.00″ per side Torflex axle = 9.00″ per side. A retrofit application will not affect the current axle outside of tire dimension. This disc brake system will not retrofit Dexter 4” drop spindle axles manufactured prior to January, 2003.

(4) Lock Washer (005-058-00)
(4) Hex Nut (006-129-00)
(4) Bolt (007-097-00)
(1) Rotor (070-007-02)
(1) Yoke Assembly (090-003-01)
(2) Brake Pads (091-004-00)
(1) Caliper Kit (K71-630-00)
(1) Instruction Sheet (059-808-00)